How to Apply Traditional (Pre-Pasted) Wallpapers?

Step 1: Prepare the Wall

• Make sure the wall is smooth, clean, and dry.
• Remove any existing wallpaper or dirt.
• If needed, prime the wall with a wallpaper primer for better adhesion.

Step 2: Prepare the Paste

• Follow the instructions on your wallpaper paste packaging to prepare the adhesive.
• Apply the paste directly to the wall using a brush or roller.

Step 3: Measure and Cut the Wallpaper

• Measure the wall and cut your wallpaper to size, leaving extra at the top and bottom.
• Roll the wallpaper loosely, paste side out.

Step 4: Apply the Wallpaper

• Start from the top and align the first panel carefully.
• Use a smoothing tool to remove air bubbles as you apply the wallpaper.

Step 5: Align and Repeat

• Align the next panel, ensuring the patterns match.
• Continue applying the wallpaper until the entire wall is covered.

Step 6: Trim Excess

• Trim off the excess wallpaper with a sharp knife, and smooth out any remaining bubbles.